CONERGY SUN TOP III
With the SunTop III, both framed and unframed photovoltaic modules can be easily mounted on pitched roofs of various types. Conergy SunTop III has been specifically designed towards minimum installation times. A
high degree of pre-assembly, intelligent design of the connections and the use
of a single tool on the roof all result in a sizeable reduction in installation time and the according cost.
All components are made of extruded aluminum and stainless steel. The high corrosion resistance guarantees the maximum possible lifespan and is also completely recyclable.
Download PDF 
CONERGY SUNTOP III - Clamps / Hanger bolts for metal roofs |
|
CONERGY SOLAR FAMULUS
Conergy Solar Famulus will easily fit a multitude of different flat roof applications, due to its
variable tilt angle and its several foot options for both ballasted solutions and
roof penetration. Its design allows modules to be mounted side by side in rows
of up to 12 m. They can be installed in both portrait and landscape mode.
Download PDF |
|
CONERGY SUN FORTE
The SunForte ground mount structures are specifically designed for solar installations on open terrain. The framed solar modules are installed in landscape mode. Made from a Conergy purpose-built aluminium profile, the frames are corrosion-resistant, strong and easy to install in a short time. The light weight of this structure ensures that shipping and assembly in remote areas is cost-effective and simple, making it an ideal solution for ground mounting both small off-grid systems and large solar power system projects.
Download PDF
|
 |
CONERGY SOLAR GIGANT III
SOLAR GIGANT III was specially designed for use in photovoltaic systems in open areas. Framed and unframed modules can be arranged in various configurations up to a surface of 45 m². The 0.8 m1 minimum module elevation above the ground prevents desolation and allows a secondary use of the terrain as pasture land. At the same time, the elevation prevents the modules from being shadowed by plants or snow.
Download PDF |
 |
CONERGY SOLAR LINEA
The Conergy SolarLinea was designed as a ground mount system especially for laminates. However, it is equally well suited to bear framed modules. Depending on project requirements, both single-row and multi-row versions are available.
Download PDF |
 |
LORENTZ ETATRACK 400 Active
ETATRACK 400 active is a single-axis solar tracker for total module surfaces max. 4m2, appx. 500W. The system is maintenance-free and designed to withstand wind speeds up to 120 km/h.
2 years manufacturer's warranty against defects in material and workmanship.
Single-axis solar tracking increases the energy return of solar modules, dependent on location, up to 40% (e.g. central US, Korea, Spain) per year in average, respectively up to 50% in Grrece during the summer months!
Download PDF |
|
LORENTZ ETATRACK 1000 Active
ETATRACK 1000 active is a single-axis tracking system for solar modules1, angle of second axis manually adjustable 0-45o for module surfaces 3.4 m X 3.2 m (c. 10 m2), c. 1.6 kWp
The system is maintenance-free and designed to withstand wind speeds up to 150 km/h.
Additional power output of up to 40 % in comparison
to fixed module installation.
2 years manufacturer's warranty against defects in material and workmanship.
Download PDF
|
|
LORENTZ ETATRACK 1500 Active
ETATRACK 1500 active is a single-axis tracking system for solar moduels 1, for module surface 3.4 m X 4.8 m (c. 15 m2), c. 2.5 kWp. The system is maintenance-free and designed to withstand wind speeds up to 150 km/h.
- frame: steel, hot-dip Zn-coated
- module fixation with stainless steel clips
- no failure-prone light sensor
- energy supply of tracking drive: 12 V (nominal voltage) to 80 V, provided by one of the tracked modules, tracking control by one of the tracked modules2
- low energy consumption, c. 1.25 kWh/year
- stepwise tracking, depending on the daily sunshine duration (length of day)
- South position in darkness
- suitable for high wind speeds: statics according to German and European standards
2 years manufacturer's warranty against defects in material and workmanship.
Download PDF |
|
ETATRACK Active 2000 SP
-
Total module surface up to c. 20.5 m2, four rows of four PV modules
-
Control concepts for solar parks of various sizes
-
No failure-prone light sensor
-
No unnecessary tracking movements
-
Low power consumption (c. 1.5 kWh/year)
-
Statics according to German and European standards
-
High reliability and life-expectancy - Maintenance-free - Cost-efficient tracking system
Download PDF |
 |
PESOS - SUNFLEX systems for photovoltaic plants
The biaxial tracking system is suitable for all types of module and ensures that the solar modules are positioned at the best possible angle to the sun. This means that not just direct solar irradiation but also scattered light are effectively converted into energy. Compared to a fixed, southward-facing plant, the pesos SunFlex tracking systems can increase yield by up to 40 percent.
General information on PESOS - SUNFLEX - PDF format |
|
